Contact Us Home Home

SiC UV Sensors

 

SiC Phtodiodes

Features

UV-Photodiodes based on SiC (Silicon Carbide)

Extremely radiation hard

Very low dark current, low capacitance

Very fast, also available with filters

also for DVGW and Austrian O-Norm standard certified lamp control

SiC Photodiode Range:

UV Broadband Photodiodes

UVA Photodiodes

UVB Photodiodes

UVC Photodiodes

UV-Index Photodiodes

spectra

UV Broadband Photodiodes

SG01S-18 /UV Broadband

SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 detector area. PTB tested high chip stability.

10mW/cm2 peak radiation results a current of approx. 780nA.

     

SG01S-18S /UV Broadband

SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, short carp- 0.06 mm2 detector area.

10mW/cm2 peak radiation results a current of approx. 400nA

     

SG01S-18ISO90/UV Broadband

SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, both pins isolated in a circle - 0.06 mm2 detector area.

10 mW/cm2 peak radiation results a current of approx. 400 nA

     

SG01S-5 /UV Broadband

SiC UV Broadband Photodiode with large TO5 hermetically sealed metal housing - 0.06 mm2 detector area.

10 mW/cm2 peak radiation results a current of approx. 400 nA

     

SG01M-18 /UV Broadband

SiC UV Broadband Photodiode with flat TO18 hermetically sealed metal housing - 0.2 mm2 detector area.

10 mW/cm2 peak radiation results a current of approx. 2600 nA

     

SG01M-18S /UV Broadband

SiC UV Broadband Photodiode with flat TO18 hermetically sealed metal housing, short cap - 0.2 mm2 detector area.

10 mW/cm2 peak radiation results a current of approx. 2000 nA

     

SG01M-18ISO90 /UV Broadband

SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, both pins isolated in a circle - 0.2 mm2 detector area.

10 mW/cm2 peak radiation results a current of approx. 2.6 μA

     

SG01M-5Lens /UV Broadband

SiC UV Broadband Photodiode with TO5 housing with concentrating lens (11 mm2 virtual detector area) - 0.2 mm2 detector area.

For very weak radiation. 10 μW/cm2 radiation at peak results a current of approx. 140 nA

     

SG01D-18 /UV Broadband

SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 detector area. PTB tested high chip stability.

10 μ/cm2 peak radiation results a current of approx. 6.5 nA

     

SG01L-18 /UV Broadband

SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 detector area.

10 μW/cm2 peak radiation results a current of approx. 12 nA

     

SG01L-18S /UV Broadband

SiC UV Broadband Photodiode with flat TO18 hermetically sealed metal housing, short cap- 1.0 mm2 detector area.

10 μW/cm2 peak radiation results a current of approx. 12 nA

     

SG01L-18ISO90 /UV Broadband

SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, two isolated pins in a circle- 1.0 mm2 detector area.

10 μW/cm2 peak radiation results a current of approx. 12 nA

     

SG01L-5 /UV Broadband

SiC UV Broadband Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 detector area.

10 μW/cm2 peak radiation results a current of approx. 12 nA

     

SG01XL-5 /UV Broadband

SiC UV Broadband Photodiode with TO5 hermetically sealed metal housing - 7.6 mm2 detector area.

10 μW/cm2 peak radiation results a current of approx. 99 nA

     

SG01XL-5ISO90 /UV Broadband

SiC UV Broadband Photodiode with TO5 hermetically sealed metal housing, two isolated pins in a circle - 7.6 mm2 detector area.

10 μW/cm2 peak radiation results a current of approx.99 nA

SG01XXL-18ISO90 /UV Broadband

SiC UV Broadband Photodiode with TO8 hermetically sealed metal housing, two isolated pins, one additional grounded pin - 36.00 mm2 detector area.

10 μW/cm2 radiation at 280 nm (peak responsivity) results a current of approx.468 nA

UVA Photodiodes

SG01S-A18

UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 active detector area. PTB tested high chip stability.

10 mW/cm2 radiation at 335nm results a current of approx. 360 nA.

     

SG01M-A18

UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.2 mm2 active detector area. PTB tested high chip stability.

10 μmW/cm2 radiation at 335 nm results a current of approx.1.2 nA

     

SG01M-A5

UVA-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.2 mm2 active detector area.

10 mW/cm2 radiation at 335nm results a current of approx. 1.6 μA

     

SG01D-A18

UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 active detector area. PTB tested high chip stability.

10 μmW/cm2 radiation at 335 nm results a current of approx. 3 nA

     

SG01L-A5

UVA-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 active detector area.

10 μW/cm2 radiation at 335nm results a current of approx. 7 nA

     

SG01L-A18

UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 active detector area. PTB tested high chip stability.

10 μmW/cm2 radiation at 335nm results a current of approx. 6 nA

     

SG01XL-A5

UVA-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 4.0 mm2 active detector area.

1 μW/cm2 radiation at 335nm results a current of approx. 3 nA

UVB Photodiodes

SG01S-B18

UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 active detector area. PTB tested high chip stability.

10 mW/cm2 peak radiation results a current of approx. 750 nA

     

SG01M-B18

UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.2 mm2 active detector area. PTB tested high chip stability.

10 μW/cm2 radiation at peak results a current of approx. 1.2 nA

     

SG01M-B5

UVB-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.2 mm2 active detector area.

10 mW/cm2 radiation at 280 nm results a current of approx. 2.3 μA

     

SG01D-B18

UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 active detector area. PTB tested high chip stability.

10 μW/cm2 radiation at peak results a current of approx. 2.9 nA

     

SG01L-B5

UVB-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 active detector area.

10 μW/cm2 radiation at 280 nm results a current of approx. 10 nA

     

SG01L-B18

UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 active detector area. PTB tested high chip stability.

10 μW/cm2 radiation at peak results a current of approx. 5.8 nA

     

SG01XL-B5

UVB-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 4.0 mm2 active detector area.

1 μW/cm2 radiation at 280 nm results a current of approx. 4 nA

UVC Photodiodes

SG01S-C18

UVC-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 active detector area. PTB tested high chip stability.

10 mW/cm2 radiation at 254 nm results a current of approx. 315 nA

     

SG01S-C5

UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.06 mm2 active detector area.

10 mW/cm2 radiation at 254 nm results a current of approx. 210 nA

     

SG01M-C5

UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.2 mm2 active detector area.

10 mW/cm2 radiation at 254 nm results a current of approx. 1.5 μA

     

SG01D-C18

UVC-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 active detector area. PTB tested high chip stability.

10 μW/cm2 radiation at 254 nm results a current of approx. 2.6 nA

     

SG01L-C5

UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 active detector area.

10 μW/cm2 radiation at 254 nm results a current of approx. 6.2 nA

     

SG01L-C18

UVC-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 active detector area. PTB tested high chip stability.

10 μW/cm2 radiation at 254 nm results a current of approx. 5.2 nA

     

SG01XL-C5

UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 4.0 mm2 active detector area.

1 μW/cm2 radiation at 254 nm results a current of approx. 2.6 nA

UV-Index Photodiodes (Erythema)

DIN5050/ CIE087 UV-Index measurement with very small error <+/-3%

SG01M-E18

(eryca-customs)

UV-Index Photodiode with TO18 hermetically sealed housing

1 UVI (2,5 μW/cm2) ≈ 500 pA

0.2 mm2 detector area

     

SG01D-E18

(eryca-customs)

UV-Index Photodiode with TO18 hermetically sealed housing

1 UVI (2,5 μW/cm2) ≈ 1,25 nA

0.5 mm2 detector area

     

SG01L-E5

(eryca-advanced)

UV-Index Photodiode with TO5 housing

1 UVI (2,5 μW/cm2) ≈ 2 nA, cosine correction

1.00 mm2 detector area

     

SG01XL-E5

(eryca-science)

UV-Index Photodiode with TO5 housing

1 UVI (2,5 μW/cm2) ≈ 8 nA, cosine correction

4.00 mm2 detector area

Data Sheets

For help in choosing the correct product for your requirements please see our product overviews.

PDF UV sensor selection guide - pdf (616K)

Ordering information

Notice that not all the UV sensors are available for online ordering, if you can't find what you want then please email us at sales@scitec.uk.com and we will try to help.

 

 SiC UV photodiodes

 

Home | Products | Newsletter | Representatives | Contact | Website Policies
Scitec Instruments Ltd 1999 - 2009. All rights reserved.